Retailers United States - PerformancePCs | Europe - Highflow

Vertical GPU

For Vertical GPU<

  • USD $1,399.00
    Quickview

    SC Spectre 3.0 Case Black

    INTRODUCING SPECTRE 3.0: Spectre 3.0 has been completely redesigned from the ground up. The case is larger in all dimensions to fit an extra expansion slot for a total of 8 making it compatible with XL-ATX motherboards. Spectre 3.0 has been designed to fit the 3090 even the Founders Edition with the stock cooler. There is more space to comfortably fit 360mm radiators up to 60mm thick. The water-cooling and cable management integration has been complete redesigned. The reservoir is easier to fill and the loop quicker and easier to bleed. The cable management fits EPS on both sides of the motherboard and can fit up to 3x 8pin EPS. The PCI is routed through the PSU Top Shroud with capacity for up to 6x PCI-E 8pin cables. The case has a completely new aesthetic with far more detailed machining on the metal components. We have removed curves and instead used angles with cutouts and depth machining to create an even more skeletal and transparent look to align with the original ideas of the case. Note: D5 Pump not included. Custom hand built MDPC-X cables with a large range of sleeve colours available here Spectre 3.0 Gallery
    USD $1,399.00
    USD $1,399.00
  • USD $1,399.00
    Quickview

    SC Spectre 3.0 Case Silver

    INTRODUCING SPECTRE 3.0: Spectre 3.0 has been completely redesigned from the ground up. The case is larger in all dimensions to fit an extra expansion slot for a total of 8 making it compatible with XL-ATX motherboards. Spectre 3.0 has been designed to fit the 3090 even the Founders Edition with the stock cooler. There is more space to comfortably fit 360mm radiators up to 60mm thick. The water-cooling and cable management integration has been complete redesigned. The reservoir is easier to fill and the loop quicker and easier to bleed. The cable management fits EPS on both sides of the motherboard and can fit up to 3x 8pin EPS. The PCI is routed through the PSU Top Shroud with capacity for up to 6x PCI-E 8pin cables. The case has a completely new aesthetic with far more detailed machining on the metal components. We have removed curves and instead used angles with cutouts and depth machining to create an even more skeletal and transparent look to align with the original ideas of the case. Note: D5 Pump not included. Custom hand built MDPC-X cables with a large range of sleeve colours available here Spectre 3.0 Gallery
    USD $1,399.00
    USD $1,399.00
  • Sold out
    USD $949.00
    Quickview

    SC Spectre 3.0 Penumbra Distribution Plate

      [spb_boxed_content title="Limited Edition" type="coloured" custom_bg_colour="#222222" custom_text_colour="#ffffff" padding_vertical="5" padding_horizontal="5" width="1/1" el_position="first last"] Spectre 3.0 Penumbra is a limited edition version of the Spectre 3.0 main Distribution Plate It is a triple layer distribution plate with a black central layer and clear outer layers. The reservoir and cable management areas are transparent and still visible from both sides. The reservoir has twice the fluid volume of the stock reservoir. Penumbra has double the light sources compared to the stock Spectre 3.0 Distribution Plate with three ARGB LED strips included, along with the three which are already included with the case. It has a 7th LED strip position under the pump top (7th LED strip not included). It has three ARGB Gold and Silver interchangeable logos, and one of the rear logos displays the unique product number. The Penumbra Distribution Plate is fully compatible with Spectre 3.0 and Spectre 3.0 Elite. ETA: 3 weeks D5 Pump not included. [/spb_boxed_content]
    USD $949.00
    USD $949.00
  • Sold out
    USD $1,799.00
    Quickview

    SC Spectre 3.0 Penumbra Silver

      [spb_boxed_content title="Limited Edition" type="coloured" custom_bg_colour="#222222" custom_text_colour="#ffffff" padding_vertical="5" padding_horizontal="5" width="1/1" el_position="first last"] Spectre 3.0 Penumbra is a limited edition version of the Spectre 3.0 main Distribution Plate It is a triple layer distribution plate with a black central layer and clear outer layers. The reservoir and cable management areas are transparent and still visible from both sides. The reservoir has twice the fluid volume of the stock reservoir. Penumbra has double the light sources compared to the stock Spectre 3.0, with 6 included ARGB LED strips and even a 7th LED strip position under the pump top (7th LED strip not included). It has three ARGB Gold and Silver interchangeable logos, and one of the rear logos displays the unique product number. The Penumbra Distribution Plate is fully compatible with Spectre 3.0 and Spectre 3.0 Elite. ETA: 3 weeks D5 Pump not included. [gallery link="none" columns="2" ids="20743,20601"]   [/spb_boxed_content]
    USD $1,799.00
    USD $1,799.00
  • USD $229.00
    Quickview

    SC Wraith 2.0 Elite Front – Black

    ,
    Wraith 2.0 Elite replaces the front panel of Wraith 2.0 with a distribution plate. This enhances the transparency of the case even further, showing off more of the coolant and internals. The distribution plate has two ports, an inlet and outlet. When installed on the front panel the ports are at the bottom. Connections can be made to and from either the radiators, other components in the build, or the Wraith 2.0 main distribution plate. A front radiator can still be attached even when Wraith 2.0 Elite is installed. There are spacers for airflow all the way around the perimeter of the distribution plate. Wraith 2.0 Gallery [embed]https://www.youtube.com/watch?v=Ywz153HHdnY&t=1s[/embed]
    USD $229.00
    USD $229.00
  • USD $229.00
    Quickview

    SC Wraith 2.0 Elite Front – Silver

    ,
    Wraith 2.0 Elite replaces the front panel of Wraith 2.0 with a distribution plate. This enhances the transparency of the case even further, showing off more of the coolant and internals. The distribution plate has two ports, an inlet and outlet. When installed on the front panel the ports are at the bottom. Connections can be made to and from either the radiators, other components in the build, or the Wraith 2.0 main distribution plate. A front radiator can still be attached even when Wraith 2.0 Elite is installed. There are spacers for airflow all the way around the perimeter of the distribution plate. Wraith 2.0 Gallery [embed]https://www.youtube.com/watch?v=Ywz153HHdnY&t=1s[/embed]
    USD $229.00
    USD $229.00
  • USD $17.00
    Quickview

    SC ARGB-Node 1×8

    ,
    A custom designed Singularity Computers hub with high quality components and a dual layer PCB. The PCB and connectors are black with white logos and labelling. It has an ARGB input which is split into 8 outputs in a row. This hub draws power from the ARGB inputs, so it does not require any extra power connections. It comes with an ARGB cable to connect the hub to your motherboard or other devices.
    USD $17.00
    USD $17.00
  • USD $17.00
    Quickview

    SC ARGB-Node 2×4

    ,
    A custom designed Singularity Computers hub with high quality components and a dual layer PCB. The PCB and connectors are black with white logos and labelling. It has an ARGB input which is split into 8 outputs in two rows. This hub draws power from the ARGB inputs, so it does not require any extra power connections. It comes with an ARGB cable to connect the hub to your motherboard or other devices.
    USD $17.00
    USD $17.00
  • USD $17.00
    Quickview

    SC Fan-Node 1×8

    ,
    A custom designed Singularity Computers hub with high quality components and a dual layer PCB. The PCB and connectors are black with white logos and labelling. It has a PWM input which is split into 8 PWM outputs in a row. This hub draws power from the PWM input, so it does not require any extra power connections. It comes with a PWM cable to connect the hub to your motherboard or other device.
    USD $17.00
    USD $17.00
  • USD $17.00
    Quickview

    SC Fan-Node 2×4

    ,
    A custom designed Singularity Computers hub with high quality components and a dual layer PCB. The PCB and connectors are black with white logos and labelling. It has a PWM input which is split into 8 PWM outputs in two rows. This hub draws power from the PWM input, so it does not require any extra power connections. It comes with a PWM cable to connect the hub to your motherboard or other device.
    USD $17.00
    USD $17.00