For Wraith and Ar
-
QuickviewArterial Dual 360mm Water-Box – Black
ArterialArterial is a dedicated high-end water-cooling enclosure with a distribution plate which integrates the reservoir, pump tops and pump covers. It fits dual 85mm thick 360mm radiators, push pull fans and a dual D5 configuration in series. The flow layout has the pumps right before the outlet to the system, then returning from the system the flow splits into parallel and runs through both radiators at the same time, then back to the reservoir. The reservoir volume is large to make filling easier and there is an internal and external fill port. The inlet and outlet are on both the inside and outside of the enclosure allowing for three different potential connection points, the rear of the flight case and both sides. All components are CNC machined, the manifold is built from cast acrylic and the enclosure from 6061 aluminum with billet structural sections and 3mm sheet for the outer panels. The fasteners are stainless steel. Note: D5 Pumps not included. Custom hand built MDPC-X PowerBoard cables with a large range of sleeve colours available here Arterial GalleryUSD $749.00USD $749.00 -
QuickviewArterial Dual 360mm Water-Box – Silver
ArterialArterial is a dedicated high-end water-cooling enclosure with a distribution plate which integrates the reservoir, pump tops and pump covers. It fits dual 85mm thick 360mm radiators, push pull fans and a dual D5 configuration in series. The flow layout has the pumps right before the outlet to the system, then returning from the system the flow splits into parallel and runs through both radiators at the same time, then back to the reservoir. The reservoir volume is large to make filling easier and there is an internal and external fill port. The inlet and outlet are on both the inside and outside of the enclosure allowing for three different potential connection points, the rear of the flight case and both sides. All components are CNC machined, the manifold is built from cast acrylic and the enclosure from 6061 aluminum with billet structural sections and 3mm sheet for the outer panels. The fasteners are stainless steel. Note: D5 Pumps not included. Arterial GalleryUSD $749.00USD $749.00 -
QuickviewArterial Dual 560mm Water-Box – Black
ArterialArterial is a dedicated high-end water-cooling enclosure with a distribution plate which integrates the reservoir, pump tops and pump covers. It fits dual 85mm thick 560mm radiators, push pull fans and a dual D5 configuration in series. The flow layout has the pumps right before the outlet to the system, then returning from the system the flow splits into parallel and runs through both radiators at the same time, then back to the reservoir. The reservoir volume is large to make filling easier and there is an internal and external fill port. The inlet and outlet are on both the inside and outside of the enclosure allowing for three different potential connection points, the rear of the flight case and both sides. All components are CNC machined, the manifold is built from cast acrylic and the enclosure from 6061 aluminum with billet structural sections and 3mm sheet for the outer panels. The fasteners are stainless steel. Note: D5 Pumps not included. Arterial GalleryUSD $849.00USD $849.00 -
QuickviewArterial Dual 560mm Water-Box – Silver
ArterialArterial is a dedicated high-end water-cooling enclosure with a distribution plate which integrates the reservoir, pump tops and pump covers. It fits dual 85mm thick 560mm radiators, push pull fans and a dual D5 configuration in series. The flow layout has the pumps right before the outlet to the system, then returning from the system the flow splits into parallel and runs through both radiators at the same time, then back to the reservoir. The reservoir volume is large to make filling easier and there is an internal and external fill port. The inlet and outlet are on both the inside and outside of the enclosure allowing for three different potential connection points, the rear of the flight case and both sides. All components are CNC machined, the manifold is built from cast acrylic and the enclosure from 6061 aluminum with billet structural sections and 3mm sheet for the outer panels. The fasteners are stainless steel. Note: D5 Pumps not included. Arterial GalleryUSD $849.00USD $849.00 -
QuickviewSC Wraith 2.0 ITX/DTX Case Black
Discontinued, Wraith 2.0Singularity Computers Wraith 2.0 is a compact case designed for ITX and DTX motherboards, capable of housing a high-end liquid cooled system. Wraith 2.0 has Singularity Computers Water-cooling integration, the entire rear wall of the case is a distribution plate which includes an integrated reservoir, D5 pump top and parts of the loop. This creates an aesthetic feature which can be the main focus of the build with a high level of transparency showing all of the components in side. It is also important for function and brings about a very different build experience and possibilities for the build design. Wraith 2.0 is built using high end materials and manufacturing processes. The distribution plate is made from thick sheets of acrylic on a CNC router and hand assembled. The metal parts are built from milled aluminium which is sandblasted and anodised and all the fasteners are stainless steel. Since Wraith was originally launched, we have been developing Wraith 2.0 with the features customers have requested. Every part of the case has been redesigned with updated aesthetics. Wraith 2.0 has three expansion slots, more space for SFX-L PSUs, a PCIE 4.0 Vertical GPU Riser, increased ventilation and many design tweaks to improve performance and component compatibility. The Distribution Plate has been redesigned including updates to the reservoir for improved filling and bleeding of the loop. All metal components have been redesigned. Wraith 2.0 has two PSU locations, the one on the rear panel is for a future Wraith 2.0 version and addon which is coming for the case but cannot be used with the distribution plate. Note: D5 Pump not included. Custom hand built MDPC-X PowerBoard cables with a large range of sleeve colours available here Wraith 2.0 Gallery [embed]https://www.youtube.com/watch?v=Ywz153HHdnY&t=1s[/embed]USD $799.00USD $799.00 -
QuickviewSC Wraith 2.0 ITX/DTX Case Silver
Discontinued, Wraith 2.0Singularity Computers Wraith 2.0 is a compact case designed for ITX and DTX motherboards, capable of housing a high-end liquid cooled system. Wraith 2.0 has Singularity Computers Water-cooling integration, the entire rear wall of the case is a distribution plate which includes an integrated reservoir, D5 pump top and parts of the loop. This creates an aesthetic feature which can be the main focus of the build with a high level of transparency showing all of the components in side. It is also important for function and brings about a very different build experience and possibilities for the build design. Wraith 2.0 is built using high end materials and manufacturing processes. The distribution plate is made from thick sheets of acrylic on a CNC router and hand assembled. The metal parts are built from milled aluminium which is sandblasted and anodised and all the fasteners are stainless steel. Since Wraith was originally launched, we have been developing Wraith 2.0 with the features customers have requested. Every part of the case has been redesigned with updated aesthetics. Wraith 2.0 has three expansion slots, more space for SFX-L PSUs, a PCIE 4.0 Vertical GPU Riser, increased ventilation and many design tweaks to improve performance and component compatibility. The Distribution Plate has been redesigned including updates to the reservoir for improved filling and bleeding of the loop. All metal components have been redesigned. Wraith 2.0 has two PSU locations, the one on the rear panel is for a future Wraith 2.0 version and addon which is coming for the case but cannot be used with the distribution plate. Note: D5 Pump not included. Custom hand built MDPC-X PowerBoard cables with a large range of sleeve colours available here Wraith 2.0 Gallery [embed]https://www.youtube.com/watch?v=Ywz153HHdnY&t=1s[/embed]USD $799.00USD $799.00 -
QuickviewSC Wraith 2.0 Volta Black
Wraith 2.0 VoltaSingularity Computers Wraith 2.0 Volta is a whole new approach to computer case design. With Spectre we introduced water-cooling system integration in the form of a distribution plate which replaced the entire rear wall of the case, we used similar ideas on Wraith 2.0. With the Singularity Computers PowerBoard we have introduced electronics integration, essentially it is a distribution plate but for cables. Wraith 2.0 is now split into two versions, one which has our water-cooling cooling integration and Volta which has PowerBoard Integration. The PowerBoard on Wraith 2.0 Volta is fully integrated replacing the entire rear wall of the case similar to the distribution plate on Wraith 2.0. Behind it are two acrylic covers, one clear with laser etching and another satin black cover. The PowerBoard integrates the 24pin and 8pin EPS, PWM & ARGB Hubs, direct connect SATA 2.5” and 3.5”. It also has integrated ARGB LEDs around the perimeter and under the motherboard, a touch activated power button, power and reset buttons and an on off switch for the ARGB LEDs. The PowerBoard reduces cable clutter meaning there is more space for liquid cooling components and loop building. Volta fits a high-end water-cooled cooled system with 2x 240mm radiators, the largest GPUs, any size SFX-L PSU and pump and reservoir.There are two PSU locations depending on the configuration you prefer, the rear PSU location allows larger pump/reservoir combos to be used and the front PSU position allows more 3.5” drives to be installed. Cables & Adaptors: Custom hand built MDPC-X PowerBoard cables with a large range of sleeve colours available here PowerBoard Cables are available here SC Shift Adaptors are available here Note: Motherboards with 90 degree 24pin, EPS and/or 6pin PCIE supplementary power connections will require SC Shift Adaptors for clean cable routing. Note: D5 Pump not included. Wraith 2.0 Volta Gallery [embed]https://www.youtube.com/watch?v=Ywz153HHdnY&t=1s[/embed]USD $599.00USD $599.00 -
QuickviewSC Wraith 2.0 Volta Silver
Wraith 2.0 VoltaSingularity Computers Wraith 2.0 Volta is a whole new approach to computer case design. With Spectre we introduced water-cooling system integration in the form of a distribution plate which replaced the entire rear wall of the case, we used similar ideas on Wraith 2.0. With the Singularity Computers PowerBoard we have introduced electronics integration, essentially it is a distribution plate but for cables. Wraith 2.0 is now split into two versions, one which has our water-cooling cooling integration and Volta which has PowerBoard Integration. The PowerBoard on Wraith 2.0 Volta is fully integrated replacing the entire rear wall of the case similar to the distribution plate on Wraith 2.0. Behind it are two acrylic covers, one clear with laser etching and another satin black cover. The PowerBoard integrates the 24pin and 8pin EPS, PWM & ARGB Hubs, direct connect SATA 2.5” and 3.5”. It also has integrated ARGB LEDs around the perimeter and under the motherboard, a touch activated power button, power and reset buttons and an on off switch for the ARGB LEDs. The PowerBoard reduces cable clutter meaning there is more space for liquid cooling components and loop building. Volta fits a high-end water-cooled cooled system with 2x 240mm radiators, the largest GPUs, any size SFX-L PSU and pump and reservoir.There are two PSU locations depending on the configuration you prefer, the rear PSU location allows larger pump/reservoir combos to be used and the front PSU position allows more 3.5” drives to be installed. Cables & Adaptors: Custom hand built MDPC-X PowerBoard cables with a large range of sleeve colours available here PowerBoard Cables are available here SC Shift Adaptors are available here Note: Motherboards with 90 degree 24pin, EPS and/or 6pin PCIE supplementary power connections will require SC Shift Adaptors for clean cable routing. Note: D5 Pump not included. Wraith 2.0 Volta Gallery [embed]https://www.youtube.com/watch?v=Ywz153HHdnY&t=1s[/embed]USD $599.00USD $599.00 -
Sale
QuickviewSC Wraith ITX/DTX Case Black
Discontinued, UncategorizedIntroducing Wraith:USD $674.10From the people who brought you the first ever PC Chassis liquid cooling integration, we now bring you Wraith. In development for the past 2 years since the release of Spectre, Wraith has all of the features of Spectre but in a smaller Mini-ITX Mini-DTX form factor. Now you can fit the most extreme components on the market into a very small space and have the ultimate in liquid cooling. Integrated cooling components include the Reservoir, D5 Pump Top, D5 Pump Cover, Fill Port, Drain Port and over half of the cooling loop. Integration and compatibility do not have to work against each other when you have more than a decade of experience building extreme liquid cooled systems. From a combination of statistics and experience we have created a port layout which will not inhibit compatibility or your creativity. Wraith has a cable cover so that stock cables can be used in a clean configuration, custom cables are not necessary. Despite its compact size Wraith can fit full sized GPUs, 2x 240mm radiators, 13x 2.5” drives and even a 3.5” drive and more. The case is designed to be modified and every component can be completely disassembled. As always we look forward to seeing your creativity with our design.
ETA: 3 weeks x1 remaining D5 Pump not included. [gallery link="none" columns="2" size="medium" ids="20742,20602"]USD $674.10 -
Sale
QuickviewSC Wraith ITX/DTX Case Silver
Discontinued, UncategorizedIntroducing Wraith:USD $674.10From the people who brought you the first ever PC Chassis liquid cooling integration, we now bring you Wraith. In development for the past 2 years since the release of Spectre, Wraith has all of the features of Spectre but in a smaller Mini-ITX Mini-DTX form factor. Now you can fit the most extreme components on the market into a very small space and have the ultimate in liquid cooling. Integrated cooling components include the Reservoir, D5 Pump Top, D5 Pump Cover, Fill Port, Drain Port and over half of the cooling loop. Integration and compatibility do not have to work against each other when you have more than a decade of experience building extreme liquid cooled systems. From a combination of statistics and experience we have created a port layout which will not inhibit compatibility or your creativity. Wraith has a cable cover so that stock cables can be used in a clean configuration, custom cables are not necessary. Despite its compact size Wraith can fit full sized GPUs, 2x 240mm radiators, 13x 2.5” drives and even a 3.5” drive and more. The case is designed to be modified and every component can be completely disassembled. As always we look forward to seeing your creativity with our design.
ETA: 3 weeks x1 remaining D5 Pump not included. [gallery link="none" columns="2" size="medium" ids="20743,20601"]USD $674.10