Retailers United States - PerformancePCs | Europe - Highflow

PowerBoard

  • USD $799.00
    Quickview

    SC PowerBoard & Distribution Plate EVGA E1

    The EVGA E1 is an extremely unique open case with a Carbon Fiber frame which benefits greatly from our PowerBoard and Distribution Plate. The E1 has very little in the way of cable management and all the cables are fully visible from both sides of the case. With the PowerBoard cable management is perfected becoming almost unnecessary. PWM and ARGB hubs are integrated reducing the clutter of more cables and hubs. There are three direct connect 2.5” SATA mounts meaning there is no need for SATA Power Cables. There are x18 integrated ARGB LEDs meaning extra LED strips are not necessary. The PowerBoard also has other integrated features such as a touch activated power button and extra power and reset buttons. The water-cooling loop is also on full display from both sides in the E1 with some long tube runs are necessary. Our distribution plate integrates the reservoir, D5 pump, D5 Pump Top, fill port, drain port, and parts of the cooling loop, greatly reducing tube runs and cleaning up the loop. A separate pump/reservoir combo would be hard to fit into the E1 and make it look cluttered taking up extra space and needing extra tube and connections. Integrated into the distribution plate the reservoir and D5 pump top saves a lot of space and looks cleaner, also optimizing flow. Singularity Computers PowerBoard: Introducing the Singularity Computers PowerBoard (US Patent Pending #547249821) a completely new take on computer cables and cable management. The idea first came about during the development of our first case Spectre 1.0. We were looking for a far more advanced method of integrating cables and cable management. The PowerBoard is essentially a distribution plate for cables. It eliminates the need for cable management, to integrate components into a single clean unit reducing clutter, to create something different which will contribute to a unique build! ETA: 4 weeks. PowerBoard & Distribution Plate EVGA E1 Gallery  
    USD $799.00
    USD $799.00
  • USD $299.00
    Quickview

    SC PowerBoard 5000 Series

    Introducing the Singularity Computers PowerBoard (US Patent Pending #547249821) a completely new take on computer cables and cable management. The idea first came about during the development of our first case Spectre 1.0. We were looking for a far more advanced method of integrating cables and cable management. The PowerBoard is essentially a distribution plate for cables. It integrates and routes the 24pin, EPS and PCIE cables very close to the components so that standardized short cables can be used. This means that cable management is no longer necessary. It integrates ARGB and PWM hubs and on some PowerBoards SATA. The PowerBoard also has integrated ARGB LEDs placed to light up the PowerBoard and/or surrounding components. The purpose of the PowerBoard is to eliminate the need for cable management, to integrate components into a single clean unit reducing clutter, to create something different which will contribute to a unique build! The PowerBoard comes included black sleeved linking cables to connect from the PowerBoard to your motherboard and GPU including the 24pin, 8pin EPS x2 and 8pin PCIE x3. Stock cables can be used to connect from the PSU to the PowerBoard or a custom black sleeved short cable set which is available here. Cables & Adaptors: Custom hand built MDPC-X PowerBoard cables with a large range of sleeve colours available here PowerBoard Cables are available here SC Shift Adaptors are available here Note: Motherboards with 90 degree 24pin, EPS and/or 6pin PCIE supplementary power connections will require SC Shift Adaptors for clean cable routing.  
    USD $299.00
    USD $299.00
  • USD $299.00
    Quickview

    SC PowerBoard PC-O11D

    Introducing the Singularity Computers PowerBoard (US Patent Pending #547249821) a completely new take on computer cables and cable management. The idea first came about during the development of our first case Spectre 1.0. We were looking for a far more advanced method of integrating cables and cable management. The PowerBoard is essentially a distribution plate for cables. It integrates and routes the 24pin, EPS and PCIE cables very close to the components so that standardized short cables can be used. This means that cable management is no longer necessary. It integrates ARGB and PWM hubs and on some PowerBoards SATA. The PowerBoard also has integrated ARGB LEDs placed to light up the PowerBoard and/or surrounding components. The purpose of the PowerBoard is to eliminate the need for cable management, to integrate components into a single clean unit reducing clutter, to create something different which will contribute to a unique build! The PowerBoard comes included black sleeved linking cables to connect from the PowerBoard to your motherboard and GPU including the 24pin, 8pin EPS x2 and 8pin PCIE x3. Stock cables can be used to connect from the PSU to the PowerBoard or a custom black sleeved short cable set which is available here. Cables & Adaptors: Custom hand built MDPC-X PowerBoard cables with a large range of sleeve colours available here PowerBoard Cables are available here SC Shift Adaptors are available here Note: Motherboards with 90 degree 24pin, EPS and/or 6pin PCIE supplementary power connections will require SC Shift Adaptors for clean cable routing.  
    USD $299.00
    USD $299.00
  • USD $229.00
    Quickview

    SC PowerBoard PC-O11D Distribution Plate

    The Singularity Computers PowerBoard is essentially a distribution plate for cables and so we wanted to create an integrated PowerBoard and Distribution Plate which are designed to go together. The PowerBoard PC-O11D Distribution Plate is a Pump and Reservoir Combination. It comes included with a DDC Pump Top so that a radiator can still fit into the bottom panel radiator mounting position of the Lian Li PC-O11D. The DDC Pump Top can be changed optionally to a D5 Pump Top available separately, but this will block the lower radiator mounting position. Cables & Adaptors: Custom hand built MDPC-X PowerBoard cables with a large range of sleeve colours available here PowerBoard Cables are available here SC Shift Adaptors are available here Note: Motherboards with 90 degree 24pin, EPS and/or 6pin PCIE supplementary power connections will require SC Shift Adaptors for clean cable routing.  
    USD $229.00
    USD $229.00
  • USD $299.00
    Quickview

    SC PowerBoard Spectre 3.0 12VHPWR

    Introducing the Singularity Computers PowerBoard (US Patent Pending #547249821) a completely new take on computer cables and cable management. The idea first came about during the development of our first case Spectre 1.0. We were looking for a far more advanced method of integrating cables and cable management. The PowerBoard is essentially a distribution plate for cables. It integrates and routes the 24pin, EPS and PCIE cables very close to the components so that standardized short cables can be used. This means that cable management is no longer necessary. It integrates ARGB and PWM hubs and on some PowerBoards SATA. The PowerBoard also has integrated ARGB LEDs placed to light up the PowerBoard and/or surrounding components. The purpose of the PowerBoard is to eliminate the need for cable management, to integrate components into a single clean unit reducing clutter, to create something different which will contribute to a unique build! The PowerBoard comes included black sleeved linking cables to connect from the PowerBoard to your motherboard and GPU including the 24pin, 8pin EPS x2 and 8pin PCIE x3. Stock cables can be used to connect from the PSU to the PowerBoard or a custom black sleeved short cable set which is available here. Cables & Adaptors: Custom hand built MDPC-X PowerBoard cables with a large range of sleeve colours available here PowerBoard Cables are available here SC Shift Adaptors are available here Note: Motherboards with 90 degree 24pin, EPS and/or 6pin PCIE supplementary power connections will require SC Shift Adaptors for clean cable routing.  
    USD $299.00
    USD $299.00
  • USD $299.00
    Quickview

    SC PowerBoard Spectre 3.0 Ardus

    Introducing the Singularity Computers PowerBoard (US Patent Pending #547249821) a completely new take on computer cables and cable management. The idea first came about during the development of our first case Spectre 1.0. We were looking for a far more advanced method of integrating cables and cable management. The PowerBoard is essentially a distribution plate for cables. It integrates and routes the 24pin, EPS and PCIE cables very close to the components so that standardized short cables can be used. This means that cable management is no longer necessary. It integrates ARGB and PWM hubs and on some PowerBoards SATA. The PowerBoard also has integrated ARGB LEDs placed to light up the PowerBoard and/or surrounding components. The purpose of the PowerBoard is to eliminate the need for cable management, to integrate components into a single clean unit reducing clutter, to create something different which will contribute to a unique build! The PowerBoard comes included black sleeved linking cables to connect from the PowerBoard to your motherboard and GPU including the 24pin, 8pin EPS x2 and 8pin PCIE x3. Stock cables can be used to connect from the PSU to the PowerBoard or a custom black sleeved short cable set which is available here. Cables & Adaptors: Custom hand built MDPC-X PowerBoard cables with a large range of sleeve colours available here PowerBoard Cables are available here SC Shift Adaptors are available here Note: Motherboards with 90 degree 24pin, EPS and/or 6pin PCIE supplementary power connections will require SC Shift Adaptors for clean cable routing.  
    USD $299.00
    USD $299.00