Retailers United States - PerformancePCs | Europe - Highflow

Spectre 3.0 Integra

Filters

Showing all 6 results

  • USD $1,599.00
    Quickview

    SC Spectre 3.0 Integra Black

    The next generation of Spectre has arrived with a new level of integration. Spectre 3.0 Integra has much of the water-cooling loop integrated with a completely new distribution plate design, with further enhancements to performance, filling and draining compared to previous Spectre versions. It has a fully integrated solution/replacement for cables with the Singularity Computers PowerBoard. Previously we have created PowerBoards for existing cases, but for Integra we have developed the PowerBoard and case together. This means that both have become far more streamlined, meaning more features and compatibility. The PowerBoard supports the most high-end components with x4 8pin EPS and x6 8pin PCIE. The case has more support for larger and wider motherboards than previous Spectre 3.0 versions. The PowerBoard has a range of new features, including built in filter capacitors, more integrated LEDs facing inwards and outwards, integrated direct connect SATA, power, and reset buttons, and a touch activated power button. There is now no rear access needed to the distribution plate layer due to the fully integrated PowerBoard, so all cables can be connected from the front and little to no cable management is needed. Black sleeved linking cables are included with the case, so no cables need to be purchased separately. Custom colored sleeved linking cables can be purchased separately if desired. Integra has improved lighting features with integrated PowerBoard LEDs facing inwards towards the motherboard tray and outwards towards the distribution plate. There are two separate sets of LEDs for ARGB or UV, and they can be switched on or off, or from UV to ARGB via two switches on the PowerBoard. [embed]https://www.youtube.com/watch?v=MhGvz9gYJtg&t=1s[/embed] Cables & Adaptors PowerBoard Cables are available here SC Shift Adaptors are available here Motherboards with 90 degree 24pin, EPS and/or 6pin PCIE supplementary power connections will require SC Shift Adaptors for clean cable routing. Custom Cables Custom hand built MDPC-X PowerBoard cables with a large range of sleeve colours available here 12VHPWR PowerBoard There is a new PCIE connector coming for the NVIDIA 40 Series which was also on the 3090Ti. It combines three 8pin PCIE connections into one cable and can handle up to 600W. The 40 Series high end GPUs will be higher TDP than the 30 Series. For existing Integra customers there are three options to make their Integra PowerBoard compatible with 12VHPWR. Option 1 is to use an adaptor cable. Option 2 is to bypass the PowerBoard and run the PCIE directly into the PSU shroud, the cables can be hidden behind a vertically mounted GPU or run cleanly down in a straight line. Option 3: We are launching an updated Integra PowerBoard with 2x 12VHPWR connectors and 3x 8pin PCIE connectors in September 2022. We will be offering a subsidised upgrade option for existing Integra customers of $99 US. The upgrade includes the new PowerBoard version and an updated motherboard tray design allowing for the much wider 12VHPWR PowerBoard version. [gallery link="file" size="medium" ids="22548,22549,22550"]
    USD $1,599.00
    USD $1,599.00
  • USD $449.00
    Quickview

    SC Spectre 3.0 Integra Elite Black

    Spectre 3.0 Integra Elite replaces the front and/or top radiator panels with a distribution plate. This enhances the transparent ‘Spectral’ look of the case, further showing off the coolant and internal components. The main purpose is an aesthetic feature although it does include fluid volume. Spectre 3.0 Integra Elite is backwards compatible with all Spectre 3.0 versions but not Spectre 1.0 or 2.0. Spectre 3.0 Integra Elite has an entirely new design with improved ventilation. The Spectre 3.0 Elite distribution plate has one inlet and one outlet. When installed on the front panel the ports are at the top and when installed on the top panel the ports are at the back so that they are close to the ports on the distribution plate. Connections can be made to the water-cooling components in the build and the Spectre 3.0 main distribution plate. Radiators can still be attached and there is ventilation around the perimeter of the distribution plate and through the ventilated sections on the front. There is an LED strip position on the edge of the distribution plate and an included ARGB 5V Addressable 50cm LED strip. Spectre 3.0 Integra Elite is backwards compatible with Spectre 3.0, Spectre 3.0 Penumbra, Spectre 3.0 Antumbra and Spectre 3.0 Ardus all versions. [sf_iconbox image="fas fa-comment-dollar" character="" color="secondary-accent" type="left-icon" title="20% Discount" link="" target="_self" animation="" animation_delay="200"] Get 20% Discount for additional Spectre 3.0 Integra Elite [/sf_iconbox]
    USD $449.00
    USD $449.00
  • USD $449.00
    Quickview

    SC Spectre 3.0 Integra Elite Silver

    Spectre 3.0 Integra Elite replaces the front and/or top radiator panels with a distribution plate. This enhances the transparent ‘Spectral’ look of the case, further showing off the coolant and internal components. The main purpose is an aesthetic feature although it does include fluid volume. Spectre 3.0 Integra Elite is backwards compatible with all Spectre 3.0 versions but not Spectre 1.0 or 2.0. Spectre 3.0 Integra Elite has an entirely new design with improved ventilation. The Spectre 3.0 Elite distribution plate has one inlet and one outlet. When installed on the front panel the ports are at the top and when installed on the top panel the ports are at the back so that they are close to the ports on the distribution plate. Connections can be made to the water-cooling components in the build and the Spectre 3.0 main distribution plate. Radiators can still be attached and there is ventilation around the perimeter of the distribution plate and through the ventilated sections on the front. There is an LED strip position on the edge of the distribution plate and an included ARGB 5V Addressable 50cm LED strip. Spectre 3.0 Integra Elite is backwards compatible with Spectre 3.0, Spectre 3.0 Penumbra, Spectre 3.0 Antumbra and Spectre 3.0 Ardus all versions. [sf_iconbox image="fas fa-comment-dollar" character="" color="secondary-accent" type="left-icon" title="20% Discount" link="" target="_self" animation="" animation_delay="200"] Get 20% Discount for additional Spectre 3.0 Integra Elite [/sf_iconbox]
    USD $449.00
    USD $449.00
  • USD $1,599.00
    Quickview

    SC Spectre 3.0 Integra Silver

    The next generation of Spectre has arrived with a new level of integration. Spectre 3.0 Integra has much of the water-cooling loop integrated with a completely new distribution plate design, with further enhancements to performance, filling and draining compared to previous Spectre versions. It has a fully integrated solution/replacement for cables with the Singularity Computers PowerBoard. Previously we have created PowerBoards for existing cases, but for Integra we have developed the PowerBoard and case together. This means that both have become far more streamlined, meaning more features and compatibility. The PowerBoard supports the most high-end components with x4 8pin EPS and x6 8pin PCIE. The case has more support for larger and wider motherboards than previous Spectre 3.0 versions. The PowerBoard has a range of new features, including built in filter capacitors, more integrated LEDs facing inwards and outwards, integrated direct connect SATA, power, and reset buttons, and a touch activated power button. There is now no rear access needed to the distribution plate layer due to the fully integrated PowerBoard, so all cables can be connected from the front and little to no cable management is needed. Black sleeved linking cables are included with the case, so no cables need to be purchased separately. Custom colored sleeved linking cables can be purchased separately if desired. Integra has improved lighting features with integrated PowerBoard LEDs facing inwards towards the motherboard tray and outwards towards the distribution plate. There are two separate sets of LEDs for ARGB or UV, and they can be switched on or off, or from UV to ARGB via two switches on the PowerBoard. [embed]https://www.youtube.com/watch?v=MhGvz9gYJtg&t=1s[/embed] Cables & Adaptors PowerBoard Cables are available here SC Shift Adaptors are available here Motherboards with 90 degree 24pin, EPS and/or 6pin PCIE supplementary power connections will require SC Shift Adaptors for clean cable routing. Custom Cables Custom hand built MDPC-X PowerBoard cables with a large range of sleeve colours available here 12VHPWR PowerBoard There is a new PCIE connector coming for the NVIDIA 40 Series which was also on the 3090Ti. It combines three 8pin PCIE connections into one cable and can handle up to 600W. The 40 Series high end GPUs will be higher TDP than the 30 Series. For existing Integra customers there are three options to make their Integra PowerBoard compatible with 12VHPWR. Option 1 is to use an adaptor cable. Option 2 is to bypass the PowerBoard and run the PCIE directly into the PSU shroud, the cables can be hidden behind a vertically mounted GPU or run cleanly down in a straight line. Option 3: We are launching an updated Integra PowerBoard with 2x 12VHPWR connectors and 3x 8pin PCIE connectors in September 2022. We will be offering a subsidised upgrade option for existing Integra customers of $99 US. The upgrade includes the new PowerBoard version and an updated motherboard tray design allowing for the much wider 12VHPWR PowerBoard version. [gallery link="file" size="medium" ids="22548,22549,22550"]
    USD $1,599.00
    USD $1,599.00
  • Sold out
    USD $4,299.00
    Quickview

    SC Spectre 3.0 Integra Umbra Chrome Elite Limited Edition

    ,
    Limited to 3 cases. ETA: 3 weeks The next generation of Spectre has arrived with a new level of integration. Spectre 3.0 Integra has much of the water-cooling loop integrated with a completely new distribution plate design, with further enhancements to performance, filling and draining compared to previous Spectre versions. It has a fully integrated solution/replacement for cables with the Singularity Computers PowerBoard. Previously we have created PowerBoards for existing cases, but for Integra we have developed the PowerBoard and case together. This means that both have become far more streamlined, meaning more features and compatibility. The PowerBoard supports the most high-end components with x4 8pin EPS and x6 8pin PCIE. The case has more support for larger and wider motherboards than previous Spectre 3.0 versions. The PowerBoard has a range of new features, including built in filter capacitors, more integrated LEDs facing inwards and outwards, integrated direct connect SATA, power, and reset buttons, and a touch activated power button. There is now no rear access needed to the distribution plate layer due to the fully integrated PowerBoard, so all cables can be connected from the front and little to no cable management is needed. Black sleeved linking cables are included with the case, so no cables need to be purchased separately. Custom colored sleeved linking cables can be purchased separately if desired. Integra has improved lighting features with integrated PowerBoard LEDs facing inwards towards the motherboard tray and outwards towards the distribution plate. There are two separate sets of LEDs for ARGB or UV, and they can be switched on or off, or from UV to ARGB via two switches on the PowerBoard. Spectre 3.0 Integra Umbra Limited Edition: Umbra Definition: The fully shaded inner region of a shadow cast by an opaque object, especially the area on the earth or moon experiencing the total phase of an eclipse. Spectre 3.0 Integra Umbra Limited Edition is the final case in the Eclipse series which includes Penumbra and Antumbra. Umbra is the darkest of the three cases and is a whole new case design based on the new Spectre 3.0 Integra platform. The design is inspired by fighter aircraft and spacecraft. Umbra has a more complex and high-end distribution plate compared to the standard Spectre 3.0 Integra with unique 3-layer design which uses different thicknesses on the same layer. It has a clear front layer and motherboard tray, grey tinted central layer, clear rear distribution plate layer and a satin black rear layer which is split into multiple parts. The motherboard tray has etching which is lit up by the PowerBoard ARGB and/or UV LEDs, the etching includes a star system coordinate which is unique for each of the 48 cases. The limited-edition number glows and appears on the rear of the distribution plate. Umbra also has a different glowing PSU Side shroud with etching to match the motherboard tray. Spectre 3.0 Integra Umbra Chrome Elite Limited Edition: In contrast to the dark themed Umbra, we have created an extremely limited silver mirror chrome version. There will only be three of these cases made due to the complexity involved in chrome plating each of the 23 metal parts of the case. Each 6061 CNC machined aluminium component first needs to be manually polished before it can be chrome plated which takes many hours. The distribution plate is different to the Umbra distribution plate with an extra layer. It has a clear front layer and motherboard tray, grey tinted central layer, clear rear distribution plate layer and two rear chrome layers facing forwards and backwards. The two mirrored layers create reflections from both the inside and outside of the case. There are also reflections all around from the case panels. The mirrored distribution plate layer reflects the light from the integrated PowerBoard LEDs out towards all the case panels. The limited-edition number glows on the rear of the distribution plate, and on the motherboard tray we will etch the coordinates to a star system of your choosing (please add this to the notes on your order). A special Umbra version glowing PSU Side Shroud is also included which is clear frosted and chrome. [embed]https://www.youtube.com/watch?v=MhGvz9gYJtg&t=1s[/embed] Cables & Adaptors PowerBoard Cables are available here SC Shift Adaptors are available here Motherboards with 90 degree 24pin, EPS and/or 6pin PCIE supplementary power connections will require SC Shift Adaptors for clean cable routing. Custom Cables Custom hand built MDPC-X PowerBoard cables with a large range of sleeve colours available here 12VHPWR PowerBoard There is a new PCIE connector coming for the NVIDIA 40 Series which was also on the 3090Ti. It combines three 8pin PCIE connections into one cable and can handle up to 600W. The 40 Series high end GPUs will be higher TDP than the 30 Series. For existing Integra customers there are three options to make their Integra PowerBoard compatible with 12VHPWR. Option 1 is to use an adaptor cable. Option 2 is to bypass the PowerBoard and run the PCIE directly into the PSU shroud, the cables can be hidden behind a vertically mounted GPU or run cleanly down in a straight line. Option 3: We are launching an updated Integra PowerBoard with 2x 12VHPWR connectors and 3x 8pin PCIE connectors in September 2022. We will be offering a subsidised upgrade option for existing Integra customers of $99 US. The upgrade includes the new PowerBoard version and an updated motherboard tray design allowing for the much wider 12VHPWR PowerBoard version. [gallery link="file" size="medium" ids="22548,22549,22550"]
    USD $4,299.00
    USD $4,299.00
  • USD $1,999.00
    Quickview

    SC Spectre 3.0 Integra Umbra Limited Edition

    ,
    Limited to 48 cases. ETA: 1 Week. The next generation of Spectre has arrived with a new level of integration. Spectre 3.0 Integra has much of the water-cooling loop integrated with a completely new distribution plate design, with further enhancements to performance, filling and draining compared to previous Spectre versions. It has a fully integrated solution/replacement for cables with the Singularity Computers PowerBoard. Previously we have created PowerBoards for existing cases, but for Integra we have developed the PowerBoard and case together. This means that both have become far more streamlined, meaning more features and compatibility. The PowerBoard supports the most high-end components with x4 8pin EPS and x6 8pin PCIE. The case has more support for larger and wider motherboards than previous Spectre 3.0 versions. The PowerBoard has a range of new features, including built in filter capacitors, more integrated LEDs facing inwards and outwards, integrated direct connect SATA, power, and reset buttons, and a touch activated power button. There is now no rear access needed to the distribution plate layer due to the fully integrated PowerBoard, so all cables can be connected from the front and little to no cable management is needed. Black sleeved linking cables are included with the case, so no cables need to be purchased separately. Custom colored sleeved linking cables can be purchased separately if desired. Integra has improved lighting features with integrated PowerBoard LEDs facing inwards towards the motherboard tray and outwards towards the distribution plate. There are two separate sets of LEDs for ARGB or UV, and they can be switched on or off, or from UV to ARGB via two switches on the PowerBoard. Spectre 3.0 Integra Umbra Limited Edition: Umbra Definition: The fully shaded inner region of a shadow cast by an opaque object, especially the area on the earth or moon experiencing the total phase of an eclipse. Spectre 3.0 Integra Umbra Limited Edition is the final case in the Eclipse series which includes Penumbra and Antumbra. Umbra is the darkest of the three cases and is a whole new case design based on the new Spectre 3.0 Integra platform. The design is inspired by fighter aircraft and spacecraft. Umbra has a more complex and high-end distribution plate compared to the standard Spectre 3.0 Integra with unique 3-layer design which uses different thicknesses on the same layer. It has a clear front layer and motherboard tray, grey tinted central layer, clear rear distribution plate layer and a satin black rear layer which is split into multiple parts. The motherboard tray has etching which is lit up by the PowerBoard ARGB and/or UV LEDs, the etching includes a star system coordinate which is unique for each of the 48 cases. The limited-edition number glows and appears on the rear of the distribution plate. Umbra also has a different glowing PSU Side shroud with etching to match the motherboard tray. [embed]https://www.youtube.com/watch?v=MhGvz9gYJtg&t=1s[/embed] Cables & Adaptors PowerBoard Cables are available here SC Shift Adaptors are available here Motherboards with 90 degree 24pin, EPS and/or 6pin PCIE supplementary power connections will require SC Shift Adaptors for clean cable routing. Custom Cables Custom hand built MDPC-X PowerBoard cables with a large range of sleeve colours available here 12VHPWR PowerBoard There is a new PCIE connector coming for the NVIDIA 40 Series which was also on the 3090Ti. It combines three 8pin PCIE connections into one cable and can handle up to 600W. The 40 Series high end GPUs will be higher TDP than the 30 Series. For existing Integra customers there are three options to make their Integra PowerBoard compatible with 12VHPWR. Option 1 is to use an adaptor cable. Option 2 is to bypass the PowerBoard and run the PCIE directly into the PSU shroud, the cables can be hidden behind a vertically mounted GPU or run cleanly down in a straight line. Option 3: We are launching an updated Integra PowerBoard with 2x 12VHPWR connectors and 3x 8pin PCIE connectors in September 2022. We will be offering a subsidised upgrade option for existing Integra customers of $99 US. The upgrade includes the new PowerBoard version and an updated motherboard tray design allowing for the much wider 12VHPWR PowerBoard version. [gallery link="file" size="medium" ids="22548,22549,22550"]
    USD $1,999.00
    USD $1,999.00