Retailers United States - PerformancePCs | Europe - Highflow

Spectre Integra M

  • USD $999.00
    Quickview

    Spectre Integra-M Black

    Spectre 3.0 Integra-M is a more compact ATX version of Spectre. It is a full re-design using everything we have learned from the development of Spectre which has continued since 2015. Integra-M is 25% smaller than Spectre 3.0 (all versions) but maintains all the features, except that it fits ATX motherboards and two 360mm radiators which are 40mm thick. Integra-M has a large part of the water-cooling loop integrated with a completely new distribution plate design. It has a fully integrated solution for cables with the Singularity Computers PowerBoard. Previously we have created PowerBoards for existing cases, but for Integra-M we have developed the PowerBoard and case together. This means that both have become far more streamlined, meaning more features and compatibility. The PowerBoard supports the most high-end components and includes two of the new 12VHPWR connectors along with x3 8pin PCIE connectors. It has built in filter capacitors, 24 integrated ARGB and UV LEDs facing inwards and outwards, integrated direct connect SATA, power, and reset buttons, and a touch activated power button. There is no rear access needed to the case for cable management, all cables can be connected from the front and little to no cable management is needed. Black sleeved linking cables are included with the case. Custom colored sleeved linking cables can be purchased separately. Cables & Adaptors: Custom hand built MDPC-X PowerBoard cables with a large range of sleeve colours available here PowerBoard Cables are available here SC Shift Adaptors are available here Note: Motherboards with 90 degree 24pin, EPS and/or 6pin PCIE supplementary power connections will require SC Shift Adaptors for clean cable routing. Note: D5 Pump not included. Spectre Integra-M Gallery [embed]https://www.youtube.com/watch?v=LyphooTO5Ws&t=32s[/embed]
    USD $999.00
    USD $999.00
  • USD $1,199.00
    Quickview

    Spectre Integra-M Dark

    Spectre 3.0 Integra-M is a more compact ATX version of Spectre. It is a full re-design using everything we have learned from the development of Spectre which has continued since 2015. Integra-M is 25% smaller than Spectre 3.0 (all versions) but maintains all the features, except that it fits ATX motherboards and two 360mm radiators which are 40mm thick. Integra-M has a large part of the water-cooling loop integrated with a completely new distribution plate design. It has a fully integrated solution/replacement for cables with the Singularity Computers PowerBoard. Previously we have created PowerBoards for existing cases, but for Integra we have developed the PowerBoard and case together. This means that both have become far more streamlined, meaning more features and compatibility. The PowerBoard supports the most high-end components and includes two of the new 12VHPWR connectors.  The PowerBoard has built in filter capacitors, 24 integrated ARGB and UV LEDs facing inwards and outwards, integrated direct connect SATA, power, and reset buttons, and a touch activated power button. There is no rear access needed to the case for cable management, all cables can be connected from the front and little to no cable management is needed. Black sleeved linking cables are included with the case. Custom colored sleeved linking cables can be purchased separately if desired. Spectre Integra-M Dark. Spectre Integra-M Dark has a space theme with aesthetics inspired by fighter jets and spacecraft. It has a 3-layer distribution plate where Spectre Integra-M which has a 2-layer distribution plate built from clear acrylic. Spectre Integra-M Dark has a clear acrylic cover and motherboard tray, the main distribution plate layer is grey tinted acrylic, the rear distribution plate layer is clear acrylic, and the rear cover is satin black acrylic. The reservoir volume is much larger allowing for easier filling and bleeding, and increased flow. Cables & Adaptors: Custom hand built MDPC-X PowerBoard cables with a large range of sleeve colours available here PowerBoard Cables are available here SC Shift Adaptors are available here Note: Motherboards with 90 degree 24pin, EPS and/or 6pin PCIE supplementary power connections will require SC Shift Adaptors for clean cable routing. Note: D5 Pump not included. Spectre Integra-M Dark Gallery [embed]https://www.youtube.com/watch?v=LyphooTO5Ws&t=2s[/embed]
    USD $1,199.00
    USD $1,199.00
  • USD $399.00
    Quickview

    Spectre Integra-M Dual Loop Side Panel

    ,
    The Spectre Integra-M Dual Loop Side Panel is an addon for any version of Spectre Integra-M including Spectre Integra-MA. Essentially it is a mirror image of the main distribution plate, but with some port location and design changes to allow for one loop for the CPU, and one for the GPU/s. It is a replacement for the side panel window and mounts directly onto the side panel window mounts, along with an extra stand-off which attaches to the rear IO panel. It is designed to be as open as possible so that you can still see the most important parts of the build. The distribution plate section only really covers the sides of the radiators and fans which is like traditional windowed case side panels. It has a removable side panel, so it is easy to gain access to the case for loop building. It has an integrated D5 pump top, Protium 2.0 Pump Cover and two ARGB LED strips which come pre-installed. There are 4 ports which are positioned for the GPU loop and top radiator, and a fill and drain port. The main distribution plate layout works perfect for the CPU loop connected to the front radiator. The Spectre Integra-M Dual Loop Side Panel can be used in dual loops, single loop series or parallel, there are many options. We have created two versions. The Spectre Integra-M Dual Loop Side panel is designed for the Spectre 3.0 Integra-M and Integra-MA and is built from clear acrylic. The Spectre Integra-M Dual Loop Side Panel Dark is designed for Spectre Integra-M Dark and has a 3mm Satin Black acrylic cover which is removable, a clear acrylic top layer and a grey tinted main rear layer. Spectre Integra-M Dual Loop Side Panel Gallery
    USD $399.00
    USD $399.00
  • USD $439.00
    Quickview

    Spectre Integra-M Dual Loop Side Panel Dark

    ,
    The Spectre Integra-M Dual Loop Side Panel is an addon for any version of Spectre Integra-M including Spectre Integra-MA. Essentially it is a mirror image of the main distribution plate, but with some port location and design changes to allow for one loop for the CPU, and one for the GPU/s. It is a replacement for the side panel window and mounts directly onto the side panel window mounts, along with an extra stand-off which attaches to the rear IO panel. It is designed to be as open as possible so that you can still see the most important parts of the build. The distribution plate section only really covers the sides of the radiators and fans which is like traditional windowed case side panels. It has a removable side panel, so it is easy to gain access to the case for loop building. It has an integrated D5 pump top, Protium 2.0 Pump Cover and two ARGB LED strips which come pre-installed. There are 4 ports which are positioned for the GPU loop and top radiator, and a fill and drain port. The main distribution plate layout works perfect for the CPU loop connected to the front radiator. The Spectre Integra-M Dual Loop Side Panel can be used in dual loops, single loop series or parallel, there are many options. We have created two versions. The Spectre Integra-M Dual Loop Side panel is designed for the Spectre 3.0 Integra-M and Integra-MA and is built from clear acrylic. The Spectre Integra-M Dual Loop Side Panel Dark is designed for Spectre Integra-M Dark and has a 3mm Satin Black acrylic cover which is removable, a clear acrylic top layer and a grey tinted main rear layer. Spectre Integra-M Dual Loop Side Panel Dark Gallery
    USD $439.00
    USD $439.00
  • USD $399.00
    Quickview

    Spectre Integra-M Elite Black

    , ,
    Spectre Integra-M Elite replaces the front and/or top radiator panel with a distribution plate on Spectre Integra-M and Spectre Integra-MA. This enhances the transparent ‘Spectral’ look of the case, further showing off the coolant and internal components. The Spectre Integra-M Elite distribution plate has one inlet and one outlet. When installed on the front panel the ports are at the top, and when installed onto the top panel the ports are at the back, so that they are close to the ports on the distribution plate. Connections can be made to the water-cooling components in the build and the Spectre Integra-M main distribution plate. Radiators can still be attached and there is ventilation around the perimeter of the distribution plate and through the ventilated sections on the front. There is an LED strip positioned along the edge of the distribution plate and an included ARGB 5V Addressable 50cm LED strip. Note: When using Spectre Integra-M Elite on the front and top panels the radiator thickness for both radiators is limited to 30mm. Spectre 3.0 Integra-M Gallery [embed]https://www.youtube.com/watch?v=LyphooTO5Ws&t=32s[/embed]
    USD $399.00
    USD $399.00
  • USD $419.00
    Quickview

    Spectre Integra-M Elite Dark

    ,
    Spectre Integra-M Elite replaces the front and/or top radiator panels with a distribution plate. This enhances the transparent ‘Spectral’ look of the case, further showing off the coolant and internal components. The Spectre Integra-M Elite distribution plate has one inlet and one outlet. When installed on the front panel the ports are at the top and when installed on the top panel the ports are at the back so that they are close to the ports on the distribution plate. Connections can be made to the water-cooling components in the build and the Spectre Integra-M main distribution plate. Radiators can still be attached and there is ventilation around the perimeter of the distribution plate and through the ventilated sections on the front. There is an LED strip positioned along the edge of the distribution plate and an included ARGB 5V Addressable 50cm LED strip. Spectre Integra-M Elite Dark. Spectre Integra-M Elite has a two-layer distribution plate. The Dark version has the main distribution plate layer in grey tinted acrylic instead of clear like the standard version. The cover layer is still transparent like the standard version so it will pick up the light from the LED strip, but the dark layer behind it will pick up less of the light. Spectre 3.0 Integra-M Elite Dark was designed for Spectre 3.0 Integra-M Dark which also has grey tined acrylic on the main distribution plate layer. Note: When using Spectre Integra-M Elite Dark on the front and top panels the radiator thickness for both radiators is limited to 30mm. Spectre 3.0 Integra-M Dark Gallery [embed]https://www.youtube.com/watch?v=LyphooTO5Ws&t=2s[/embed]
    USD $419.00
    USD $419.00
  • USD $399.00
    Quickview

    Spectre Integra-M Elite Silver

    , ,
    Spectre Integra-M Elite replaces the front and/or top radiator panel with a distribution plate on Spectre Integra-M and Spectre Integra-MA. This enhances the transparent ‘Spectral’ look of the case, further showing off the coolant and internal components. The Spectre Integra-M Elite distribution plate has one inlet and one outlet. When installed on the front panel the ports are at the top, and when installed onto the top panel the ports are at the back, so that they are close to the ports on the distribution plate. Connections can be made to the water-cooling components in the build and the Spectre Integra-M main distribution plate. Radiators can still be attached and there is ventilation around the perimeter of the distribution plate and through the ventilated sections on the front. There is an LED strip positioned along the edge of the distribution plate and an included ARGB 5V Addressable 50cm LED strip. Note: When using Spectre Integra-M Elite on the front and top panels the radiator thickness for both radiators is limited to 30mm. Spectre 3.0 Integra-M Gallery [embed]https://www.youtube.com/watch?v=LyphooTO5Ws&t=32s[/embed]
    USD $399.00
    USD $399.00
  • USD $999.00
    Quickview

    Spectre Integra-M Silver

    Spectre 3.0 Integra-M is a more compact ATX version of Spectre. It is a full re-design using everything we have learned from the development of Spectre which has continued since 2015. Integra-M is 25% smaller than Spectre 3.0 (all versions) but maintains all the features, except that it fits ATX motherboards and two 360mm radiators which are 40mm thick. Integra-M has a large part of the water-cooling loop integrated with a completely new distribution plate design. It has a fully integrated solution for cables with the Singularity Computers PowerBoard. Previously we have created PowerBoards for existing cases, but for Integra-M we have developed the PowerBoard and case together. This means that both have become far more streamlined, meaning more features and compatibility. The PowerBoard supports the most high-end components and includes two of the new 12VHPWR connectors along with x3 8pin PCIE connectors. It has built in filter capacitors, 24 integrated ARGB and UV LEDs facing inwards and outwards, integrated direct connect SATA, power, and reset buttons, and a touch activated power button. There is no rear access needed to the case for cable management, all cables can be connected from the front and little to no cable management is needed. Black sleeved linking cables are included with the case. Custom colored sleeved linking cables can be purchased separately. Cables & Adaptors: Custom hand built MDPC-X PowerBoard cables with a large range of sleeve colours available here PowerBoard Cables are available here SC Shift Adaptors are available here Note: Motherboards with 90 degree 24pin, EPS and/or 6pin PCIE supplementary power connections will require SC Shift Adaptors for clean cable routing. Note: D5 Pump not included. Spectre Integra-M Gallery [embed]https://www.youtube.com/watch?v=LyphooTO5Ws&t=32s[/embed]
    USD $999.00
    USD $999.00
  • USD $799.00
    Quickview

    Spectre Integra-MA Black

    ,
    Spectre 3.0 Integra-M is a more compact ATX version of Spectre. Integra-M is a full re-design using everything we have learned from the development of Spectre which has continued since 2015. Integra-MA does not include a distribution plate but includes a PowerBoard. It is capable of housing a high-end liquid cooled system with two 360mm radiators, the top one up to 40mm thick and the front one up to 60mm thick. The Singularity Computers PowerBoard is an integrated solution for cables, lighting and much more. Previously we have created PowerBoards for existing cases, but for Integra we have developed the PowerBoard and case together. This means that both have become far more streamlined, meaning more features and compatibility. The PowerBoard supports the most high-end components and includes two of the new 12VHPWR connectors.  The PowerBoard has built in filter capacitors, 24 integrated ARGB and UV LEDs facing inwards and outwards, integrated direct connect SATA, power, and reset buttons, and a touch activated power button. There is no rear access needed to the case for cable management, all cables can be connected from the front and little to no cable management is needed. Black sleeved linking cables are included with the case. Custom colored sleeved linking cables can be purchased separately. Cables & Adaptors: Custom hand built MDPC-X PowerBoard cables with a large range of sleeve colours available here PowerBoard Cables are available here SC Shift Adaptors are available here Note: Motherboards with 90 degree 24pin, EPS and/or 6pin PCIE supplementary power connections will require SC Shift Adaptors for clean cable routing. Note: D5 Pump not included. Spectre Integra-MA Gallery [embed]https://www.youtube.com/watch?v=LyphooTO5Ws&t=32s[/embed]
    USD $799.00
    USD $799.00
  • USD $799.00
    Quickview

    Spectre Integra-MA Silver

    ,
    Spectre 3.0 Integra-M is a more compact ATX version of Spectre. Integra-M is a full re-design using everything we have learned from the development of Spectre which has continued since 2015. Integra-MA does not include a distribution plate but includes a PowerBoard. It is capable of housing a high-end liquid cooled system with two 360mm radiators, the top one up to 40mm thick and the front one up to 60mm thick. The Singularity Computers PowerBoard is an integrated solution for cables, lighting and much more. Previously we have created PowerBoards for existing cases, but for Integra we have developed the PowerBoard and case together. This means that both have become far more streamlined, meaning more features and compatibility. The PowerBoard supports the most high-end components and includes two of the new 12VHPWR connectors.  The PowerBoard has built in filter capacitors, 24 integrated ARGB and UV LEDs facing inwards and outwards, integrated direct connect SATA, power, and reset buttons, and a touch activated power button. There is no rear access needed to the case for cable management, all cables can be connected from the front and little to no cable management is needed. Black sleeved linking cables are included with the case. Custom colored sleeved linking cables can be purchased separately. Cables & Adaptors: Custom hand built MDPC-X PowerBoard cables with a large range of sleeve colours available here PowerBoard Cables are available here SC Shift Adaptors are available here Note: Motherboards with 90 degree 24pin, EPS and/or 6pin PCIE supplementary power connections will require SC Shift Adaptors for clean cable routing. Note: D5 Pump not included. Spectre Integra-MA Gallery [embed]https://www.youtube.com/watch?v=LyphooTO5Ws&t=32s[/embed]
    USD $799.00
    USD $799.00