SC PowerBoard Cable 12VHPWR Fixed 600W

One of the benefits of the PowerBoard is that the cable lengths have been standardised and the cables are very short meaning they do not require any cable management. PowerBoard Linking Cables connect your motherboard and GPU to the PowerBoard, these are 1:1 extensions with female connections on both ends. PowerBoard PSU Cables connect your PSU to the PowerBoard and are the same as your stock PSU cables just shorter. These are high quality 16AWG Heatshrinkless Black Sleeved cables specifically designed for the PowerBoard. The 24pin and EPS are arched meaning the inner cable lengths are shorter than the outer cable lengths. Component connector positions vary so there is a small margin of excess length built into these cables to allow for this. SC PowerBoard Cable 12VHPWR Fixed 600W: PowerBoard 12VHPWR cable for power supplies without 12VHPWR, so that you can run 8pin PCIE on the input side of the PowerBoard and 12VHPWR on the output side, this cable has no communication and is fixed at 600W. Note: PowerBoard Cable Lengths are standard for all PowerBoards and every Singularity Computers Case with a PowerBoard. Cables & Adaptors: Custom hand built MDPC-X PowerBoard cables with a large range of sleeve colours available here SC Shift Adaptors are available here Note: Motherboards with 90 degree 24pin, EPS and/or 6pin PCIE supplementary power connections will require SC Shift Adaptors for clean cable routing.