Retailers United States - PerformancePCs | Europe - Highflow
SC Spectre 3.0 Integra Black
  • T (1)
  • 031
  • 035
  • 035
  • 039
  • 041
  • 045
  • 047
  • 051
  • 053
  • 055
  • 056
  • 063

SC Spectre 3.0 Integra Black

USD $1,599.00

The next generation of Spectre has arrived with a new level of integration. Spectre 3.0 Integra has much of the water-cooling loop integrated with a completely new distribution plate design, with further enhancements to performance, filling and draining compared to previous Spectre versions. It has a fully integrated solution/replacement for cables with the Singularity Computers PowerBoard. Previously we have created PowerBoards for existing cases, but for Integra we have developed the PowerBoard and case together. This means that both have become far more streamlined, meaning more features and compatibility. The PowerBoard supports the most high-end components with x2 12VHPWR, x3 8pin PCIE and x4 8pin EPS. The case has more support for larger and wider motherboards than previous Spectre 3.0 versions. The PowerBoard has a range of new features, including built in filter capacitors, more integrated LEDs facing inwards and outwards, integrated direct connect SATA, power, and reset buttons, and a touch activated power button. There is now no rear access needed to the distribution plate layer due to the fully integrated PowerBoard, so all cables can be connected from the front and little to no cable management is needed. Black sleeved linking cables are included with the case, so no cables need to be purchased separately unless they require cables which are not included in the standard set (see specifications). Custom colored sleeved linking cables can be purchased separately. Integra has improved lighting features with integrated PowerBoard LEDs facing inwards towards the motherboard tray and outwards towards the distribution plate. There are two separate sets of LEDs for ARGB or UV, and they can be switched on or off, or from UV to ARGB via two switches on the PowerBoard.

Note: D5 Pump not included.

Cables & Adaptors
Custom hand built MDPC-X PowerBoard cables with a large range of sleeve colours available here
PowerBoard Cables are available here
SC Shift Adaptors are available here
Motherboards with 90 degree 24pin, EPS and/or 6pin PCIE supplementary power connections will require SC Shift Adaptors for clean cable routing.

Spectre 3.0 Integra Gallery

12VHPWR PowerBoard Now Included with x2 12VHPWR and x3 8pin PCIE.

 

SKU: SC-S3-INT-B Category: Tag:
000

Complete The Look

+ + +
Price for all: USD $2,092.80

Specifications

Water-cooling Integration:
Reservoir, Pump Top, Pump Cover, Fill Port, Drain Port, Parts of water-cooling loop.
Ports: x6 G1/4” BSPP. 1x Fill Port. 1x Drain Port.
Pump: (Not included): Compatible with all D5 pumps.
PowerBoard Integration:
Core Component Cables: 24pin x1. PCIE 8pin x 3. 12VHPWR x2. 8pin EPS x4 (As many inputs must be used as outputs).
Hubs: PWM: x6. ARGB: x10 (Single input for each).
LEDs: x20 Integrated ARGB 90-degree LEDs and x15 UV 90-degree LEDs facing around the internal and external perimeter of the PowerBoard. There are two switches on the PowerBoard one switches the ARGB on or off and the other switches the UV on or off.
Touch sensing Power Button.
Extra Power and Reset Buttons.
PowerBoard LED on/off switch. (Requires reboot for setting to take effect).
PowerBoard 2.5” SATA 3.0 6Gb/s Direct Mount x1.
Cables:
PowerBoard Linking Cables Standard Set: 24pin x1. 8pin EPS x2. 8pin PCIE x3. 18AWG Black Headshrinkless Sleeve.
PWM Female to Female 50cm Black Sleeved x1.
ARGB Female to Female 50cm Black Sleeved x1.
Touch Power Button and extra Power and Reset Button Cables 20cm x4.
LED Strips: x3 50cm ARGB LED Strips with 50cm cables. (Attach to case panels on specific mounting points for front and top panel glow).
Motherboard Form Factor: XL-ATX (Up to: 285mm Wide & 343.5mm High). E-ATX, ATX, Mini-DTX, Mini-ITX.
Expansion Slots: x8.
Case Form Factor: Mid Tower.
Package Dimensions: L: 640mm W: 620mm H: 110mm (Case is flat packed and requires partial assembly).
Package Weight: 17kg.
Case Dimensions: L: 545mm H: 595mm W: 254mm.
Case Weight: 15kg.
Storage: 7x 2.5”. x2 are on top of the PSU shroud and cannot be used when the GPUs are vertically mounted. x4 are inside of the PSU Shroud. x1 is on the PowerBoard behind the PSU.
Radiators: 360mm x 60mm with x1 set of standard 25mm fans. Or 360mm x 40mm with x2 sets of standard 25mm fans (Push/Pull).
Maximum GPU Length: 500mm.
Maximum GPU Height: 170mm in standard orientation. Unlimited in vertical orientation.
Maximum CPU Cooler Height: 170mm.
Maximum PSU Length: 220mm (Space allowed for cables inside of PSU shroud).
Front Panel I/O: No Front I/O. Vandal Switch 16mm white LED.
Vertical GPU Mount: x2 with 3 slot (60mm) spacing. x1 is included. 2nd Vertical GPU Mount Available Separately Here. Riser cable not included, compatible with Linkup PCIE 4.0 Riser Cables.
Materials: 6061 Aluminum Anodized. Cast Acrylic. Stainless Steel. PCB.
Manufacturing Process: CNC Mill, CNC Lathe, CNC Router, PCB.
Assembly: Distribution Plate Assembled by Hand. Metal Components need to be assembled and attached to the distribution plate by the customer.
Testing/Validation: All Distribution Plates are factory pressure tested and precise fastener tension is applied.

Included Items

Case Components:
Distribution Plate with PowerBoard: x1
Clear Cast Acrylic Side Panel Window: x1.
Protium 2.0 ARGB D5 Cover: x1.
Case Panel Set: x21 pieces.
LED Diffusors x2.
Vertical GPU Mount: x1. (Includes Vertical GPU Bracket and Angle Mount).

Cables:
PowerBoard Linking Cables Standard Set: 24pin x1. 8pin EPS x2. 8pin PCIE x3. 18AWG Black Headshrinkless Sleeve.
PWM Female to Female 50cm Black Sleeved x1.
ARGB Female to Female 50cm Black Sleeved x1.
Touch Power Button and extra Power and Reset Button Cables 20cm x4.

Accessories:
Hex Keys: M3: x1. M4: x1. M6: x1.
Microfiber Cloth: x1.
Stop Fittings: x2.
5v ARGB LED Strip 50cm: x3.

Features

Integrated Liquid Cooling Features:
Reservoir, D5 Pump Top, D5 Pump Cover, Fill Port, Drain Port, part of the water-cooling loop.
PowerBoard Integration:
The PowerBoard is a PCB integrating 24pin, PCIE, 12VHPWR and EPS along with PWM and ARGB Hubs, SATA and Power and Reset Buttons. The Spectre 3.0 Integra PowerBoard also has an integrated touch sensing Power Button. The PowerBoard has x20 ARGB LEDs positioned around the external and internal perimeter to optimally light up the distribution plate. Essentially the PowerBoard is a distribution plate for cables also integrating other features and functions. It is a new method for cables allowing standardization of cable lengths and making cable management almost unnecessary. Spectre 3.0 Integra comes included with a standard set of black sleeved linking cables including 24pin x1, 8pin EPS x2, 8pin PCIE x3 meaning that these cables don’t have to be purchased separately.
Reduced build time due to integration:
With the pump, reservoir, fill and drain ports, parts of the water-cooling loop, the core component cables, PWM and ARGB hubs all integrated there is less assembly to be done. Also, less fittings and tube are needed. There is almost no cable management for the core component cables thanks to the PowerBoard integration.
Integration Cost Component:
A large portion of the case cost is due to the integration. These are components you do not have to purchase for your build. The pump top, reservoir, cables, hubs, less fittings, less tube, no lighting, no cable combs, or cable management components.
Integration & Optimization:
With the integration we did not just develop a case, we also developed all the integrated components. This meant that we could focus more on optimization than would normally be possible. The integrated loop routes in Spectre 3.0 Integra allow for more flow than 16mm tubes. The pump top was designed for the D5 pump, maximizing flow to and from the distribution plate. The reservoir was designed to remove air as quickly as possible making the loop easier to fill. The fill port is at the highest point on the back for the case and the drain point at the lowest point. Integrating a solution for cables meant that we could optimise cable management to the point where there is almost none to do, standardise the cable lengths, and position integrated connectors right where they are needed.
High End Components:
Spectre 3.0 Integra fits up to EATX and XL-ATX motherboards and has 8 expansion slots. It is designed to fit the largest high-end GPUs. It can fit the largest PSUs up to 220mm. For the water-cooling system it can fit 2x 360mm radiators 60mm thick with a single set of fans or 2x 360mm radiators 40mm thick with two sets of fans, and the D5 pump. The PowerBoard can handle the most high-end PSUs and components.
Radiator Adjustment:
The radiator mounting panels have a large range of adjustment to help with port alignment to the distribution plate.
Storage:
Spectre 3.0 Integra has 7x 2.5” Drive positions. Two are on the top of the PSU shroud, four inside of the PSU shroud and there is one integrated on the PowerBoard. The two on top of the PSU shroud cannot be used with vertically mounted GPUs.

Design & Engineering

We have been building high end water-cooled systems for over 15 years. Our approach to product development begins with a need for our own builds and so the origin is always function. From there we start to build ideas around this function and the aesthetics and everything else follows. The original ideas for our products came from years of building highly customized, high end water-cooled systems and trying to reduce the exceptionally long build times and complexity. Our approach to development is hands on, we are using and testing our own products every day.
The aesthetics of Spectre originate from its function with one of the main aesthetic features (the distribution plate lighting) being something only made possible by the integration. We wanted the case to look skeletal and almost transparent enough to (in a way) disappear around the components. The metal components have been designed to enhance this with an extreme focus on detailed and complex multi sided CNC machining.

Manufacturing, Quality

Almost all components of Spectre 3.0 Integra are CNC machined from a solid block of material. There is no hidden or back side, and this also goes for the components being installed. Due to this we selected the most high-end materials manufacturing process. The Distribution Plate is machined on a CNC router built from thick sheets of cast acrylic. It is hand assembled with silicone gaskets and stainless-steel fasteners, and pressure tested. The metal components are machined with extreme precision from solid blocks of 6061 aluminum on a CNC mill then sand blasted and anodized.

Download Manuals

Spectre 3.0 Integra Manual Spectre 3.0 Integra PowerBoard Manual

Additional information

Weight 19 kg
Dimensions 640 × 620 × 110 mm

Reviews(0)

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Questions and answers of the customers

    Will the 2x 360mm radiator space in the Integra 3.0 be enough to cool both a CPU and the power hungry RTX 4090?
  1. 0 votes
    Q Will the 2x 360mm radiator space in the Integra 3.0 be enough to cool both a CPU and the power hu...... Read more
    Asked by Frank Hill on September 21, 2022 3:50 pm
    There are no answers for this question yet. Answer now

Send me a notification for each new answer.