Retailers United States - PerformancePCs | Europe - Highflow
Spectre 3.0 Integra Umbra Chrome Elite Limited Edition
  • 0320_B_edit1
  • 001Elite
  • 002Elite
  • 0003
  • 0004
  • 0013
  • 0015
  • 015Elite
  • 0016
  • 016Elite
  • 0001
  • 001Elite
  • 002Elite
  • 0016
  • 016Elite
  • 017Elite
  • 019Elite
  • 021Elite
  • 0025
  • 025Elite
  • 026Elite
  • 027Elite
  • 0038
  • 0046
  • 0051
  • 0058
  • 0063
  • 0072
  • 0076
  • 0081
  • 0082
  • 0084
  • 0094
  • RGB1 (1)
  • RGB3 (2)

Spectre 3.0 Integra Umbra Chrome Elite Limited Edition

USD $4,299.00

Limited to 3 cases.
ETA: 3 weeks

The next generation of Spectre has arrived with a new level of integration. Spectre 3.0 Integra has much of the water-cooling loop integrated with a completely new distribution plate design, with further enhancements to performance, filling and draining compared to previous Spectre versions. It has a fully integrated solution/replacement for cables with the Singularity Computers PowerBoard. Previously we have created PowerBoards for existing cases, but for Integra we have developed the PowerBoard and case together. This means that both have become far more streamlined, meaning more features and compatibility. The PowerBoard supports the most high-end components with x4 8pin EPS and x6 8pin PCIE. The case has more support for larger and wider motherboards than previous Spectre 3.0 versions. The PowerBoard has a range of new features, including built in filter capacitors, more integrated LEDs facing inwards and outwards, integrated direct connect SATA, power, and reset buttons, and a touch activated power button. There is now no rear access needed to the distribution plate layer due to the fully integrated PowerBoard, so all cables can be connected from the front and little to no cable management is needed. Black sleeved linking cables are included with the case, so no cables need to be purchased separately. Custom colored sleeved linking cables can be purchased separately if desired. Integra has improved lighting features with integrated PowerBoard LEDs facing inwards towards the motherboard tray and outwards towards the distribution plate. There are two separate sets of LEDs for ARGB or UV, and they can be switched on or off, or from UV to ARGB via two switches on the PowerBoard.

Spectre 3.0 Integra Umbra Limited Edition:

Umbra Definition:
The fully shaded inner region of a shadow cast by an opaque object, especially the area on the earth or moon experiencing the total phase of an eclipse.

Spectre 3.0 Integra Umbra Limited Edition is the final case in the Eclipse series which includes Penumbra and Antumbra. Umbra is the darkest of the three cases and is a whole new case design based on the new Spectre 3.0 Integra platform. The design is inspired by fighter aircraft and spacecraft. Umbra has a more complex and high-end distribution plate compared to the standard Spectre 3.0 Integra with unique 3-layer design which uses different thicknesses on the same layer. It has a clear front layer and motherboard tray, grey tinted central layer, clear rear distribution plate layer and a satin black rear layer which is split into multiple parts. The motherboard tray has etching which is lit up by the PowerBoard ARGB and/or UV LEDs, the etching includes a star system coordinate which is unique for each of the 48 cases. The limited-edition number glows and appears on the rear of the distribution plate. Umbra also has a different glowing PSU Side shroud with etching to match the motherboard tray.

Spectre 3.0 Integra Umbra Chrome Elite Limited Edition:

In contrast to the dark themed Umbra, we have created an extremely limited silver mirror chrome version. There will only be three of these cases made due to the complexity involved in chrome plating each of the 23 metal parts of the case. Each 6061 CNC machined aluminium component first needs to be manually polished before it can be chrome plated which takes many hours. The distribution plate is different to the Umbra distribution plate with an extra layer. It has a clear front layer and motherboard tray, grey tinted central layer, clear rear distribution plate layer and two rear chrome layers facing forwards and backwards. The two mirrored layers create reflections from both the inside and outside of the case. There are also reflections all around from the case panels. The mirrored distribution plate layer reflects the light from the integrated PowerBoard LEDs out towards all the case panels. The limited-edition number glows on the rear of the distribution plate, and on the motherboard tray we will etch the coordinates to a star system of your choosing (please add this to the notes on your order). A special Umbra version glowing PSU Side Shroud is also included which is clear frosted and chrome.

Cables & Adaptors
PowerBoard Cables are available here
SC Shift Adaptors are available here
Motherboards with 90 degree 24pin, EPS and/or 6pin PCIE supplementary power connections will require SC Shift Adaptors for clean cable routing.

 

000

Frequently Bought Together

+ + +
Price for all: USD $4,792.80

Specifications

Water-cooling Integration:
Reservoir, Pump Top, Pump Cover, Fill Port, Drain Port, Parts of water-cooling loop.
Ports: x6 G1/4” BSPP. 1x Fill Port. 1x Drain Port.
Pump: (Not included): Compatible with all D5 pumps.
Electronics Integration:
Core Component Cables: 24pin x1. PCIE 8pin x 6. 8pin EPS x4 (As many inputs must be used as outputs).
Hubs: PWM: x6. ARGB: x10 (Single input for each).
LEDs: x20 Integrated ARGB 90-degree LEDs and x15 UV 90-degree LEDs facing around the internal and external perimeter of the PowerBoard. There are two switches on the PowerBoard one switches the ARGB on or off and the other switches the UV on or off.
Touch sensing Power Button.
Extra Power and Reset Buttons.
PowerBoard LED on/off switch. (Requires reboot for setting to take effect).
PowerBoard 2.5” SATA 3.0 6Gb/s Direct Mount x1.
Cables: PowerBoard Linking Cables Standard Set: 24pin x1. 8pin EPS x2. 8pin PCIE x3. 18AWG Black Headshrinkless Sleeve. Linking cables and PSU Side Cables available here: (LINK HERE).
Adaptors for motherboards with 90-degree connectors available here: (LINK HERE).
PWM Female to Female 50cm Black Sleeved x1.
ARGB Female to Female 50cm Black Sleeved x1.
LED Strips: x3 50cm ARGB LED Strips with 50cm cables. (Attach to case panels on specific mounting points for front and top panel glow).
x1 30cm LED strip pre-installed into PSU Side Shroud.
Motherboard Form Factor: XL-ATX (Up to: 285mm Wide & 343.5mm High).
E-ATX, ATX, Mini-DTX, Mini-ITX.
Expansion Slots: x8.
Case Form Factor: Mid Tower.
Package Dimensions: L: 640mm W: 620mm H: 110mm (Case is flat packed and requires partial assembly).
Package Weight: 17kg.
Case Dimensions: L: 545mm H: 595mm W: 254mm.
Case Weight: 15kg.
Storage: 7x 2.5”. x2 are on top of the PSU shroud and cannot be used when the GPUs are vertically mounted. x4 are inside of the PSU Shroud. x1 is on the PowerBoard behind the PSU.
Radiators: 360mm x 60mm with x1 set of standard 25mm fans. Or 360mm x 40mm with x2 sets of standard 25mm fans (Push/Pull).
Maximum GPU Length: 500mm.
Maximum GPU Height: 170mm in standard orientation. Unlimited in vertical orientation.
Maximum CPU Cooler Height: 170mm.
Maximum PSU Length: 220mm (Space allowed for cables inside of PSU shroud).
Front Panel I/O: No Front I/O. Vandal Switch 16mm white LED.
Vertical GPU Mount: x2 with 3 slot (60mm) spacing. x1 is included. 2nd Vertical GPU Mount Available Separately (HERE LINK). Riser cable not included, compatible with Linkup PCIE 4.0 Riser Cables.
Materials: 6061 Aluminum Anodized. Cast Acrylic. Stainless Steel. PCB.
Manufacturing Process: CNC Mill, CNC Lathe, CNC Router, PCB.
Assembly: Distribution Plate Assembled by Hand. Metal Components need to be assembled and attached to the distribution plate by the customer.
Testing/Validation: All Distribution Plates are factory pressure tested and precise fastener tension is applied.

Included Items

Spectre 3.0 Integra Case.
Distribution Plate Integrated Components:
Reservoir: x1. Pump Top: x1. Pump Cover: x1. Fill Port: x1. Drain Port: x1.
PowerBoard Integrated Components:
Core Component Cables: 24pin x1. PCIE 8pin x 6. 8pin EPS x4 (As many inputs must be used as outputs).
Hubs: PWM: x6. ARGB: x10 (Single input for each).
LEDs: x20 Integrated ARGB 90-degree LEDs and x15 UV 90-degree LEDs facing around the internal and external perimeter of the PowerBoard. There are two switches on the PowerBoard one switches the ARGB on or off and the other switches the UV on or off.
Touch sensing Power Button.
Extra Power and Reset Buttons.
Cables:
PowerBoard Linking Cables Standard Set: 24pin x1. 8pin EPS x2. 8pin PCIE x3. 18AWG Black Headshrinkless Sleeve. Linking cables and PSU Side Cables available here: (LINK HERE).
Adaptors for motherboards with 90-degree connectors available here: (LINK HERE).
PWM Female to Female 50cm Black Sleeved x1.
ARGB Female to Female 50cm Black Sleeved x1.
Case Components:
Distribution Plate: x1
Clear Cast Acrylic Side Panel Window: x1.
Protium 2.0 ARGB D5 Cover: x1.
Case Panel Set: x23 pieces.
Vertical GPU Mount: x1. (Includes Vertical GPU Bracket and Angle Mount.
Accessories:
Hex Keys: M3: x1. M4: x1. M6: x1.
Microfiber Cloth: x1.
Stop Fittings: x2.
5v ARGB LED Strip 50cm: x2.

Features

Spectre 3.0 Integra Case.
Distribution Plate Integrated Components:
Reservoir: x1. Pump Top: x1. Pump Cover: x1. Fill Port: x1. Drain Port: x1.
PowerBoard Integrated Components:
Core Component Cables: 24pin x1. PCIE 8pin x 6. 8pin EPS x4 (As many inputs must be used as outputs).
Hubs: PWM: x6. ARGB: x10 (Single input for each).
LEDs: x20 Integrated ARGB 90-degree LEDs and x15 UV 90-degree LEDs facing around the internal and external perimeter of the PowerBoard. There are two switches on the PowerBoard one switches the ARGB on or off and the other switches the UV on or off.
Touch sensing Power Button.
Extra Power and Reset Buttons.
Cables:
PowerBoard Linking Cables Standard Set: 24pin x1. 8pin EPS x2. 8pin PCIE x3. 18AWG Black Headshrinkless Sleeve. Linking cables and PSU Side Cables available here: (LINK HERE).
Adaptors for motherboards with 90-degree connectors available here: (LINK HERE).
PWM Female to Female 50cm Black Sleeved x1.
ARGB Female to Female 50cm Black Sleeved x1.
Case Components:
Distribution Plate: x1
Clear Cast Acrylic Side Panel Window: x1.
Protium 2.0 ARGB D5 Cover: x1.
Case Panel Set: x23 pieces.
Vertical GPU Mount: x1. (Includes Vertical GPU Bracket and Angle Mount.
Accessories:
Hex Keys: M3: x1. M4: x1. M6: x1.
Microfiber Cloth: x1.
Stop Fittings: x2.
5v ARGB LED Strip 50cm: x2.

Design & Engineering

We are all experienced system builders at Singularity Computers having built high end water-cooled systems for over 15 years. Our approach to product development begins with a need for our own builds and so the origin is always function. From there we start to build ideas around this function and the aesthetics and everything else follows. The original idea for Spectre came from our years of building highly customized, high end water-cooled systems and trying to reduce the exceptionally long build times and complexity. Our approach to development is hands on, we are using our own products every day.
The aesthetics of Spectre originate from its function with one of the main aesthetic features (the distribution plate lighting) being something only made possible by the integration. We wanted the case to look skeletal and almost transparent enough to (in a way) disappear around the components. The metal components have been designed to enhance this with an extreme focus on detailed and complex multi sided CNC machining.

Manufacturing, Quality

Every component of Spectre is CNC machined from a solid block of material. With the level of transparency and being an open case, we wanted it to be a celebration of the raw materials. There is no hidden or back side, and this also goes for the components being installed. Due to this we selected the most high-end materials manufacturing process. The Distribution Plate is machined on a CNC router built from thick sheets of cast acrylic. It is hand assembled with silicone gaskets and stainless-steel fasteners, and pressure tested. The metal components are machined with Extreme Precision from solid blocks of 6061 aluminum on a CNC mill then sand blasted and anodized.

Additional information

Weight 19 kg
Dimensions 640 × 620 × 110 mm

Reviews(0)

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.